It
monitors your home using a motion sensor and two
glass break sensors that can also be used as magnetic
contact sensors. The motion detector can detect
motion from up to 30 feet away. If not disarmed
by the owner using one of the two included remote
controls, it will respond with an ear piercing
alarm and blinding strobe light. A switch on the
side of the strobe light allows the light to remain
on and used for emergency lighting during a power
outage. The glass break sensors will detect the
vibration caused from someone attempting to break
in through a window. You can adjust it's sensitivity,
turn it off, or cause the alarm to sound instantly
or after a delay. You can also plug a magnetic
contact sensor into the side of the glass break
sensor to detect the opening of a door or window.
This dual level of security is very important
in protecting sliding glass doors. A burglar will
be detected if attempts to break the glass or
if he attempts to pry the door open.
The
system includes a wireless, external siren which
can be mounted on the outside your home or business.
If the motion detector, the glass break sensor,
or the magnetic contact detects an intruder it
will send a signal (RF) to the external siren
which will also respond with an ear piercing siren
and strobe light. With siren sounding and lights
flashing both inside and outside your home or
business, the burglar will be scared off and help
will come from neighbors.
The
system also includes a lightweight remote panic
alarm that can be attached to a keychain or worn
around the neck. This can be used by an elderly
person who has fallen down to get help from neighbors.
The
complete system includes 1 motion detector with
alarm and strobe, 2 remote controls, 2 glass break
sensors and/or magnetic contacts, 1 external siren
with alarm and strobe, 1 panic remote with neck
cord, 2 alarm system warning decals, and adjustable
mounting brackets and screws for the motion detector
and external siren. Additional remotes can be
purchased separately: see item below.
|
